Correct operation process of extraction and concentration unit:

   The extraction and concentration unit is more suitable for medicine, food and other industries, and can effectively extract medicinal juice, juice and other substances, but in order to ensure the normal use of the machine, the operation should be carried out in accordance with the correct method and the correct process, only in this way can the machine work better.

Correct operation process of extraction and concentration unit:

First, prepare before starting, check whether the sealing places and valves of the equipment are intact without leakage, whether the vacuum pump rotation is flexible and intact, whether the electrical appliances and voltage in the automatic control box are normal, whether the boiler water is filled, and whether the cooling water is normal.

2. Open the top cover of the extraction tank, weigh the material according to the specified requirements and put it into the extraction tank, add the corresponding water or solvent, turn on the general power supply, turn on the automatic heating button, turn on the cooling water on the condenser, set the required temperature value on the temperature controller, start the hot water circulation of the hot water pump, and open the vacuum pump when the target temperature is reached. Before starting the vacuum pump, the inlet valve must be opened first, and no idling without water is prohibited. Open the vacuum valve of the extraction tank, and keep the vacuum degree in the extraction tank from -0.03Mpa to -0.04MPa to increase the boiling point and material dynamics in the tank. If the vacuum pump screams, the air leakage valve on the vacuum pump head can be fine-tuned counterclockwise. After extraction, turn off the circulating pump power supply of hot water pump and open the air outlet.

3. After the water ring vacuum pump is disabled for a long time, the motor blade cover must be removed and the blade can be turned by hand for several revolutions before it can be started.

Extraction concentrator maintenance:

1. Cleaning and storage of sanitary ware: rags and buckets are washed with detergent until they show their true colors, washed with drinking water until there is no foam, and then put into the sanitary ware room (area) to dry naturally after water control.

2. After cleaning, fill in the clearance record.

3, special attention: After the maintenance of equipment and machinery, it is necessary to carry out strict inspection to confirm that no parts fall off or remain, before clearing and cleaning operation.

The above is the operation procedure of the extraction concentrator, according to the above mentioned to do, I believe that the extraction equipment will work better, but also to ensure the long-term use of the machine.